Follow the guides below to set up your Tredruns security camera quickly and correctly. If you need further assistance, visit our FAQ page or contact us.
Indoor Cameras
1. Choose a location with a clear field of view and access to a power outlet.
2. Mount the camera bracket using the included screws and anchors.
3. Attach the camera to the bracket and connect to power.
4. Download the companion app and follow the in-app setup to connect to your WiFi network.
5. Test the live feed and adjust the angle as needed.
Outdoor Cameras
1. Select a weatherproof mounting location, ideally under an eave for extra protection.
2. Run the cable through the wall or along the exterior using cable clips.
3. Mount the bracket and attach the camera securely.
4. Connect to power (PoE or adapter depending on model).
5. Configure via the app or NVR system and verify the live feed.
Doorbell Cameras
1. Turn off power to your existing doorbell at the circuit breaker.
2. Remove the old doorbell and connect the wires to the Tredruns doorbell terminals.
3. Attach the doorbell to the mounting plate.
4. Restore power and follow the in-app setup instructions.
5. Configure motion zones and notification preferences in the app.
Dash Cams
1. Clean the windshield area where the camera will be mounted.
2. Attach the mount using the adhesive pad or suction cup.
3. Connect the power cable to the 12V/USB port or hardwire kit.
4. Route the cable neatly along the headliner and A-pillar.
5. Power on and configure recording settings via the camera menu.
Need Help?
If you encounter any issues during installation, please visit our FAQ or reach out via our Contact page.